Confirm if the LED is on
Multiple positions can be confirmed with just one device and can be easily and stably detected through AI settings.

Measure the size of the lead frame
The size of the terminal components can be measured immediately after punching, and when abnormal stamping occurs, it can be immediately detected. Because it is a pre calibrated measuring instrument, it can ensure the accuracy of the measurement values.

Measure the outer diameter and true roundness of the optical fiber base material
Transparent workpieces can also be stably and accurately measured, and even if the target object is tilted, the correct value can be obtained through the correction function. The contour can also be obtained through encoder input.

Measurement of terminal width and spacing
Due to the deep focusing depth, synchronous detection of 16 channels can be achieved, thus avoiding measurement errors caused by position deviation and achieving accurate measurement.

Positioning wafer
In the past, multiple shots were used to ensure resolution, but now, one-time shots help accelerate the detection pace.

Laser positioning of electronic printed circuit boards
In addition to one-time shooting with a large field of view, the camera is also equipped with an angle sensor, which can obtain reproduced images even if the camera position is tilted.

Appearance inspection of winding coils
Appearance inspection cases of winding coils. When inspecting the appearance of glossy windings, under the illumination conditions of four-dimensional ordinary ring light, sometimes the detection results may be unstable due to light reflection or color deviation. By using multispectral mode, only the defective parts to be detected can be extracted, achieving stable detection.

Detection of crystal oscillator defects
When the color difference between the desired area and the background is not significant, it is difficult to detect defects in the contour part. Using LumiTrax ™ The mode allows lighting to be partially illuminated from four directions, allowing for extraction of contour parts and stable detection.

Detection of connector resin shell and connector pins
With a 3D camera using pattern projection, accurate and stable automatic full detection can be achieved with just a simple adjustment of position. It can simultaneously detect multiple items such as flatness (flatness), spacing, position (horizontal/vertical), and 3D shape of resin casing for multiple pins. Within a stop time of only 0.6 seconds on an intermittent production line, a maximum of 60.2 mm can be achieved × The overall high-precision 3D measurement of the workpiece within a wide field of view of 60.2 mm can also shorten the lead time.

Observation and quantitative evaluation of wiring harnesses and crimping terminals
By capturing ultra high precision 4K images with full focus on the target object as a whole, it is easy to carry out accurate and efficient magnification observation, appearance detection, and evaluation.

New Observations and Analysis of Lithium Ion Batteries and New Generation Batteries
Without changing the lens, it can seamlessly zoom in by 20 to 6000 times, and various targets can be observed through various lighting methods.

Dimensional measurement of connector box
It is possible to simultaneously measure the center distance and overall dimensions of the terminal insertion part of the connector.

Wafer Mapping
Through narrow Angular aperture (about 3 °), the interference caused by light diffusion can be avoided, so the detection with high positioning accuracy can be realized.