Detect connector terminal bending
Set up the necessary tools for connector detection, making it easy to detect without the need for calculations. By using a 21 megapixel camera, higher accuracy detection can also be achieved.

Assembly and inspection of torque converter
In the assembly process of metal components, even components with the same color system as the background can be detected through the height information obtained from 3D images, thus avoiding the impact of low contrast or uneven grayscale, and stably conducting detection. When using patterned projection illumination for detection, it is possible to obtain images from standard images, LumiTrax ™、 Choosing the appropriate image in 3D images can help reduce the labor required to adjust settings and improve product yield.

Count of components inside the detection tray
It is difficult to detect the entire tray through images with uniform grayscale levels. If the contrast between the components and the tray is small, the detection effect will be unstable. By combining height information obtained from 3D images for detection, it can be almost unaffected by the uneven contrast of the entire field of view, achieving stable detection. In addition, not only can it be counted, but it can also identify different varieties and pros and cons, and detect poor posture of components. Can simultaneously obtain LumiTrax ™ Image, therefore, can remove the influence of ambient light and suppress gray level deviations.

Testing the Mixing of Different Varieties of Rubber Ring Components
Using the multispectral mode, even if it is only a slight Color difference, it can accurately distinguish the mixing of different varieties

Welding inspection of the top surface of the sealing plate for lithium-ion batteries
The 3D camera "XT" is not easily affected by the color and material of the target and background, and can stably obtain concave and convex information in the field of view online. Therefore, it is possible to distinguish between dirt and pinholes in the welding section, achieving automatic full detection. In addition, it can be applied to a maximum of 60.2 mm × The entire surface of the workpiece within a wide field of vision of 60.2 mm is subjected to high-precision 3D measurement in batches, so it can also simultaneously detect the height and shape of the terminals. By rationalizing the testing process, it can also help shorten lead time.

Measure the flatness of the busbar
With a 3D camera using pattern projection, a maximum of 60.2 mm can be obtained × Perform 3D actual size detection on height data within a wide field of view of 60.2 mm. High precision measurement of the overall 3D shape of the workpiece can be carried out within a stop time of only 0.6 seconds on an intermittent production line, thereby shortening production lead time and achieving correct full shape detection.

Efficient observation of screw defects (dents, scratches, cracks, undulations, etc.)
By using a "multi directional observation system", it is possible to clearly observe small dents, scratches, and other defects on screws from various angles at low or high magnification without changing the position of the target object.

Measurement of large castings and additional workpieces
Accurate 3D measurement can be carried out at various positions such as processing machines, on-site, and pallets.